Endress+Hauser Proline Prosonic Flow P 500 - Electrical Connection

Proline Prosonic Flow P 500
Endress+Hauser 31
Electrical connection Connection of the connecting cable: Proline 500
UP
CH1
CH2
UP
DOWN
DOWN
1.
2.
3.
4.
A0043219
1 Securing clamp
2 Connection compartment cover: sensor cable connection
3 Channel 1 UP: upstream/DOWN: downstream
4 Channel 2 UP: upstream/DOWN downstream
Transmitter connection
• Terminal assignment →  29
• Device plug pin assignment →  30
Connecting the transmitter: Proline 500
1
2
3
4
A0026781
1 Terminal connection for supply voltage
2 Terminal connection for signal transmission, input/output
3 Terminal connection for signal transmission, input/output or terminal for network connection (DHCP client)
via service interface (CDI-RJ45; non-Ex); optional: connection for external WLAN antenna
4 Terminal connection for potential equalization (PE)
An adapter for the RJ45 to the M12 plug is optionally available:
Order code for "Accessories", option NB: "Adapter RJ45 M12 (service interface)"
The adapter connects the service interface (CDI-RJ45; non-Ex) to an M12 plug mounted in the
cable entry. The connection to the service interface can thus be established via an M12 plug
without opening the device.
Network connection (DHCP client) via service interface (CDI-RJ45) →  75