Proline Prosonic Flow P 500
2 Endress+Hauser
Table of contents
About this document ........................ 4
Symbols .................................... 4
Function and system design ................... 5
Measuring principle ............................ 5
Measuring system ............................. 6
Equipment architecture ........................ 14
Dependability ............................... 14
Input .................................... 17
Measured variable ............................ 17
Measuring range ............................. 17
Operable flow range ........................... 17
Input signal ................................ 17
Output .................................. 19
Output and input variants ....................... 19
Output signal ............................... 21
Signal on alarm .............................. 25
Load ..................................... 27
Ex connection data ........................... 27
Low flow cut off ............................. 28
Galvanic isolation ............................ 28
Protocol-specific data .......................... 28
Power supply ............................. 29
Terminal assignment .......................... 29
Available device plugs ......................... 29
Pin assignment, device plug ...................... 30
Supply voltage .............................. 30
Power consumption ........................... 30
Current consumption .......................... 30
Power supply failure .......................... 30
Overcurrent protection element ................... 30
Electrical connection .......................... 31
Potential equalization ......................... 37
Terminals ................................. 37
Cable entries ............................... 37
Cable specification ............................ 37
Overvoltage protection ......................... 38
Performance characteristics .................. 38
Reference operating conditions ................... 38
Maximum measurement error .................... 38
Repeatability ............................... 40
Influence of ambient temperature ................. 40
Mounting procedure ........................ 40
Mounting location ............................ 40
Orientation ................................ 41
Inlet and outlet runs .......................... 41
Mounting the sensor .......................... 43
Mounting the transmitter housing ................. 57
Special mounting instructions .................... 58
Environment .............................. 58
Ambient temperature range ..................... 58
Storage temperature .......................... 58
Relative humidity ............................ 59
Operating height ............................. 59
Degree of protection .......................... 59
Shock and vibration resistance .................... 59
Electromagnetic compatibility (EMC) ............... 59
Process .................................. 60
Medium temperature range ...................... 60
Sound velocity range .......................... 60
Medium pressure range ........................ 60
Pressure loss ............................... 60
Mechanical Construction .................... 61
Dimensions in SI units ......................... 61
Dimensions in US units ......................... 66
Weight ................................... 70
Materials .................................. 70
Display and user interface ................... 72
Operation concept ............................ 72
Languages ................................. 73
Local operation .............................. 73
Remote operation ............................ 73
Service interface ............................. 75
Supported operating tools ....................... 76
HistoROM data management ..................... 78
Certificates and approvals ................... 79
CE mark ................................... 79
UKCA marking .............................. 79
RCM marking ............................... 79
Ex approval ................................ 79
Functional safety ............................. 80
HART certification ............................ 81
Radio approval .............................. 81
Additional certification ......................... 81
External standards and guidelines ................. 81
Ordering information ....................... 81
Application packages ....................... 82
Diagnostic functionality ........................ 82
Heartbeat Technology ......................... 82
Petroleum ................................. 82
Petroleum & Product identification ................. 82
Accessories ............................... 83
Device-specific accessories ...................... 83
Communication-specific accessories ................ 85
Service-specific accessories ...................... 85
System components ........................... 86
Supplemental documentation ................. 86
Standard documentation ........................ 86
Supplementary device-dependent documentation ....... 87
To Next Page
Loading...
