Endress+Hauser Proline Prosonic Flow P 500 - Page 84

Proline Prosonic Flow P 500
84 Endress+Hauser
Weather protection cover
Transmitter
Proline 500
Is used to protect the measuring device from the effects of the weather: e.g.
rainwater, excess heating from direct sunlight.

Proline 500 transmitter
Order number: 71343505

Installation Instructions EA01191D
Sensor cables
Proline 500
Sensor –
Transmitter
The sensor cable can be ordered directly with the measuring device (order code for
"Cable") or as an accessory (order number DK9012).
The following cable lengths are available:
• Temperature: –40 to +80 °C (–40 to +176 °F)
• Option AA: 5 m (15 ft)
• Option AB: 10 m (30 ft)
• Option AC: 15 m (45 ft)
• Option AD: 30 m (90 ft)
• Temperature: –50 to +170 °C (–58 to +338 °F)
• Option BA: 5 m (15 ft)
• Option BB: 10 m (30 ft)
• Option BC: 15 m (45 ft)
• Option BD: 30 m (90 ft)
• Armored; temperature: –40 to +80 °C (–40 to +176 °F)
• Option CA: 5 m (15 ft)
• Option CB: 10 m (30 ft)
• Option CC: 15 m (45 ft)
• Option CD: 30 m (90 ft)
• Armored; temperature: –50 to +170 °C (–58 to +338 °F)
• Option DA: 5 m (15 ft)
• Option DB: 10 m (30 ft)
• Option DC: 15 m (45 ft)
• Option DD: 30 m (90 ft)

Possible cable length for a Proline 500 sensor cable: max. 30 m (100 ft)
For the sensor
Accessories Description
Sensor set (DK9013) • Sensor set 0.3 MHz (C-030)
• Sensor set 0.5 MHz (C-050, CH-050)
• Sensor set 1 MHz (C-100, CH-100)
• Sensor set 2 MHz (C-200)
• Sensor set 5 MHz (C-500)
Sensor holder set
(DK9014)
• Sensor holder set 0.3 to 2 MHz
• Sensor holder set, high-temperature version 0.5 to 1 MHz
• Sensor holder set 5 MHz
Installation set (DK9015) • Installation set, DN15-DN32, 1/2-1 1/4"
• Installation set, DN32-DN65, 1 1/4-2 1/2"
• Installation set, DN50-DN150, 2"-6"
• Installation set, DN150-DN200, 6"-8"
• Installation set, DN200-DN600, 8"-24"
• Installation set, DN600-DN2000, 24"-80"
• Installation set, DN2000-DN4000, 80"-160"
• Installation set, high-temperature version, DN50-DN80, 2"-3"
• Installation set, high-temperature version, DN80-DN200, 3"-8"
• Installation set, high-temperature version, DN200-DN300, 8"-12"
• Installation set, high-temperature version, DN300-DN600, 12"-24"
Conduit adapter set
(DK9003)
• Conduit adapter M20x1.5 + sensor cable gland
• Conduit adapter NPT1/2'' + sensor cable gland
• Conduit adapter G1/2'' + sensor cable gland
Coupling medium
(DK9CM)
• Coupling pad
• Coupling foil
• Coupling gel