Endress+Hauser Promag 100 - Promag, Promass 500-Digital

EA01018D
Endress+Hauser 23
10.4 Replacing the T-DAT, polycarbonate transmitter housing
1 → 2
T20
1.
2.
-
+
-
ESC
10.4.1 Reassembling the polycarbonate transmitter housing
Reassembly is carried out in reverse order.
11 Promag, Promass 500–digital
11.1 Sensor connection housing, ultra-compact, hygienic, stainless
11.2 Replacing the cover, profile seal for cover
1 →
2
1.
2.
8 mm
4 Nm
(3 lbf ft)
11.2.1 Reassembling the sensor connection housing
Reassembly is carried out in reverse order.
The material specification 1.4404-316L is engraved in the cover. If this information is
missing, then the material is 1.4301-304.