Endress+Hauser Proservo NMS80 - Page 16

Installation Proservo NMS80
16 Endress+Hauser
5.2.3 Installation for all-in-one method
In the case of a 50 mm (1.97 in) or 70 mm (2.76 in) diameter displacer, the device can be
delivered by all-in-one method.
Displacer is shipped separately according to the following specifications.
• 47 m (154.2 ft) measuring range
• 55 m (180.5 ft) measuring range
• 110 mm (4.33 in) displacer
• NPS8 in flange
• Cleaned from oil+grease option
2
3
4
5
6
1
A0030108
 5 Removing packing materials
1 Tape
2 Fixing band
3 Displacer holder
4 Wire drum stopper
5 Drum housing cover
6 Screws and bolts