Engcon EC233 - Load-Holding Valve Torques

9 Technical data
9.3. Load-holding valve
Listed below are the torques required to defeat the load-holding valves on the tilt
cylinders.
Description
EC02
EC204
EC206
Torque
Nm*
4,700 (rotation right)
5,000 (rotation right)
7,000 (rotation right)
Torque
Nm*
3,500 (rotation left)
4,000 (rotation left)
6,000 (rotation left)
Description
EC209
EC214
EC219
EC226
EC233
Torque
Nm*
18,000
22,000
41,000
45,000
68,000
Table 23.
*Values calculated with a universal tilt upper section; values may vary depending on the tilt upper
section.
60