ENHANCED VISION DaVinci Pro - Adjusting the Volume; Adjusting the Brightness

25
Adjusting the Volume
1. On the Control Console you can turn the [Volume Wheel]
(Left EDGE of Console) to increase or decrease the volume
during OCR Readback.
2. Optionally it can be adjusted via the Audio Sub Menu in the
system Menu.
Adjusting the Brightness
1. Brightness can be adjusted in either CCTV mode or OCR Mode by
pressing the Brightness Toggle Switch on the control Console.
2. Optionally it can also be adjusted via the Display Sub menu in the
system Menu.
Figure 12 Volume Wheel
Figure 13 Brightness Switch