EMW90HDNC1U Air-cooled Chiller
Figure 4-4 System shutdown
After shutdown, the status of water chiller
changes from "Running" to "Key Off".
4.4 Set the Operation
Mode
Each time the button after the Mode parameter is
clicked on the homepage interface of the control
system, the system switches the operating mode
of the chiller in turn. See Table 2-3 for details
about the operating modes.
4.5 Status
Click Status on the homepage interface of the
system to view the current environmental status,
operating status and group control status
(optional) of the chiller.
Figure 4-5 Envir Status interface
Figure 4-6 Run Status interface
Figure 4-7 Team Status interface
The group control function is an optional function.
When the chiller is not configured with the group
control function, the parameter value of the Team
Status interface is displayed as "****", as shown
in Figure 4-7.
4.6 Record
Click Record on the homepage interface of the
system to view the current operation record and
operation log of the chiller.
Figure 4-8 Run Record interface
To Next Page
Loading...