14
Operating Instructions
Figure 15: Aux (Top Light) Control
Top Light Control
For added ambiance the EX32 also has a light at the
top of the replace that can be controlled with the
Transmitter. The light is non-adjustable but can be
turned on and off as desired. To control the top light
press the MODE key (Figure 5) to index to the AUX
control icon (Figure 15). Use the UP/DOWN arrow
keys to turn the light on or off. A single beep from
the IFC will conrm the command has been received.
The top light is most noticable when the ame is set
to the lowest setting. It can also be left on when the
ame is off (see remote Flame Control section) to
highlight the log set.
Figure 14: Split Flow Control
Split Flow Control
This function is not used on the EX32 and can be
disregarded.
Key lock
This function will lock the keys to avoid unsupervised operation. To activate this
function, press the MODE and UP keys at the same time and the a lock will appear
(see Figure 16). To de-activate this function, press the MODE and UP Keys at the
same time.
Figure 16: Remote Control
Locked.
To Next Page
Loading...
Need help?
General
