Enviro S50 - General Information; Kit Contents - Starter Kit

4
General Information
This kit is the required starting point to suspend the S50 from a ceiling. This kit is to be combined with addi-
tional 1ft and 2ft segments (50-4299 and 50-4300 respectively) to create the desired structure height to sus-
pend your S50. These instructions will go over what this kit contains, details about framing and clearances,
and instructions for assembly. These instructions can be used for either version of the starter kit (50-4074
Metallic Black, 50-4298 Carrara White).
4
14 3 2
1
11
12
10
7
8
6
13
9
5
Item Description Item Description
1 Ceiling Mount Assembly 7 S50-S Air Box Joint Plate (x2)
2 S50-S Top Plate Assembly 8 S50-S Air Box Joint Spacer (x2)
3 Duravent 10” Trim Collar 9 S50 Fan Cover
4 Duravent 10” Slip Section 10 Section conect plate (x4)
5 S50-S 1FT Brace Cutout 11, 12, 13 4ft Long Gas Flex Line w/ ttings
6 S50-S 2FT Brace Cutout 14 Manual Bag
Figure 1: Starter Kit Contents (50-4074 or 4298)
Table 1: Starter Kit Content Descriptions
Kit Contents - starter Kit
Note: S50 Suspension Kits only work for at ceilings. Not compatible with vaulted, cathedral or
arched ceilings.
A qualied engineer or architect MUST sign o on the structure supporting the hanging kit prior
to installation. Maximum total system weight is 400lb.