Enviro S50 - Codes and Approvals; Altitude Installation Guidelines; Intertek Tested Standards and Certifications; S50 Fireplace Specifics

6
Framing and Clearances
Max. Height - 14 ft.
[50-4300]
2ft Section
[50-4299]
1ft Section
Duravent
10” Trim Collar
(Included)
Min. Height - 18 ½”
Refer to section
“Clearance to
Combustibles” in
the Owner’s Manual
Figure 4: S50-S Installation Diagram
WARNING
When installing the S50 Suspension Kit, all clearances and venting requirements must be adhered
to. Failure to do so could result in serious injury, death, or property damage.
Refer to the Clearance to Combustibles and Top Vent Conguration sections within the Owner’s
Manual for more details.
Note: S50 Suspension Kits only work for at ceilings. Not compatible with vaulted, cathedral or
arched ceilings.