User Manual
Gobi-640-17µm and Gobi-384-25µm-GigE, CL, CXP Camera
Warning: This symbol highlights important instructions. These instructions
must be followed to avoid malfunctions!
1.5. Safety Warnings
The following safety warnings must be followed:
Supply voltage polarity: Use the correct polarity of the 12 V supply voltage.
Warranty: The warranty becomes void in case of unauthorized tampering or
any manipulations not approved by the manufacturer.
Electrostatic discharge: The camera contains sensitive electronic
components which can be destroyed by means of electrostatic discharge.
Use sufficient grounding to minimize the risk of damage.
Environmental conditions: Operate the camera in dry and dust free
environment.
Regarding the signal quality of the camera it is an advantage to operate the
camera under constant ambient air temperature (~20°C).
Beneath or above ambient temperature a sufficient heating or cooling may
Warm-up Period: Depending on the prevailing environmental conditions,
some time might pass after the camera start, until the image quality reaches
1.6. Conformity
Xenics declares under its sole responsibility that all standard cameras of the Gobi 640
family to which this declaration relates to, are conform with the following standard(s) or
other normative document(s):
• CE, following the provisions of 2004/108/EG directive
• RoHS (2002/95/EC).
CE:
We declare, under our sole responsibility, that the previously described Gobi cameras
conform to the CE directives.
www.envision.co.kr •Supporting your Vision
(주)앤비젼 서울시 금천구 가산동 550-1 IT캐슬 1동 603호 (153-768)
Tel. 02. 2624. 5503 Fax. 02. 2082. 6427 e-mail. sales@envision.co.kr
To Next Page
Loading...
Need help?
General