User Manual
Gobi-640-17µm and Gobi-384-25µm-GigE, CL, CXP Camera
5. Software Installation
Before being able to start the camera, the Xeneth imaging suite (at least version 2.4) and
its graphical user interface must be installed, so that the data coming from a wide variety of
Xenics detectors and cameras can be easily operated on and analyzed.
5.1. Xeneth Installation
It is a good practice to first uninstall a previous Xeneth version when
installing a new one.
Refer to the Xeneth Installation Manual (Ref. 6) that is delivered on the CD together with
the camera to install Xeneth.
When using camera link cameras, it is also necessary to pre-install the frame
grabber before installing Xeneth! Refer to the frame grabber manual for
installation instructions.
5.2. SDK Installation
The optional SDK installation file is delivered on the CD together with the camera. Install
the SDK software using this file.
After the SDK installation, the SDK manual, together with the samples and header files can
be found in the C:\Program Files\Xeneth\SDK directory.
www.envision.co.kr •Supporting your Vision
(주)앤비젼 서울시 금천구 가산동 550-1 IT캐슬 1동 603호 (153-768)
Tel. 02. 2624. 5503 Fax. 02. 2082. 6427 e-mail. sales@envision.co.kr
To Next Page
Loading...
Need help?
General