Arrow Series Technical Reference Manual
22
2.2 INSTALLING THE USB DRIVERS FOR WINDOWS
Manual USB Driver installation is not necessary for Windows 7, 8 and 10 operating systems
as it is distributed by the Microsoft Update Center. When the Arrow is connected to the PC via USB
and the PC has access to the Internet, drivers will be installed automatically. If a manual installation is
required for older versions of Windows, please download the latest drivers install file from the
Download section of www.eos-gnss.com .
Launch the Installer file and click on “Extract” at the bottom of the welcome window. If a warning
message from Windows appears: “The requested operation requires elevation” then you must run the
executable in Administrator mode. Close the open window, right-click on the driver filename and select
“Run as administrator”.
On the Installation Wizard, click on “Next” and then read and accept the License Agreement. Click on
“Next” to install the drivers.
To Next Page
Loading...
General