ep CQD20 - Page 42

35
Check the hydraulic oil level
It is going to add hydraulic oil when you heard explosion sound from pipe during
lifting.
• Prepare the truck for maintenance and
repairs ( See 5.3.3 Maintenance Instructions).
• Opening the cover.
• Add hydraulic oil of the correct grade ( See
5.3.2 Lubrication Schedule ) .
Add hydraulic oil till you cant hear explosion sound during lifting.
Installation is the reverse order.
Check transmission oil level
• Prepare the truck for maintenance and repairs (See 5.3.3 Maintenance Instructions).
• Open the cover (See 5.3.3 Maintenance
Instructions ).
• Check the transmission oil level, it should be at
the control plug level (See 5.3.2 Lubrication
Schedule).
• If necessary add transmission oil of the correct grade (See 5.3.2 Lubrication
Schedule).
Installation is the reverse order.
Recommissioning
The truck may only be recommissioned after cleaning or repair work, once the
following operations have been performed.
• Test horn.
• Test Emergency brake switch.
• Test brake.
• Lubricate the truck in accordance with the maintenance schedule.
Warning!
Forbid adding hydraulic oil within
impurity.
Warning!
Forbid adding transmission oil within
impurity.