ep F4 - EN Standards; Electromagnetic Compatibility (EMC); Conditions for Application

REV. 09/2021
3
B
1.1.1 EN standards
Continuous sound level:
74 dB(A)
according to EN 12053 as stipulated in ISO 4871
The continuous sound level is a value averaged according to standard regulations, taking the
sound pressure level into account when driving, lifting and idling. The sound pressure level is
measured at the ear.
Electromagnetic compatibility (EMC)
The manufacturer confirms compliance with the limit values for electromagnetic emission and
interference immunity as well as testing of static electricity discharge according to EN 12895 and
the references to other standards contained therein.
Electrical or electronic components and their arrangement may only be modied after written
approval by the manufacturer has been obtained.
WARNING
• Fire extinguisher shall be equipped at the work site. Users can choose truck equipped with
re extinguisher. Driver and manger should be familiar with the re extinguisher position
and application method.
• Use tray when carrying small items, do not place on the fork directly.
• After power o󰀨, brake works and the truck can not be towed(dragged).
• Do wash the inner of the truck, do not place the truck outdoors and exposed to the rain.
• Before dismantle or repair the truck, lift the battery out of the truck rstly.
1.1.2 Conditions for application
Working condition requirements:
– The truck's maximum operation altitude is up to 2000m.
– Trucks can only be operated in adequately illuminated working areas to avoid injuries. In case
of insu󰀩cient light, an additional lighting equipment is needed to ensure that the driver can see
properly.
If you must travel on an incline, the gradients should be below A% at full load, or below B%
without a load.(For the value of A and B, refer to the Gradability in technical data)