ep F4 - Removing a Broken Truck

REV. 09/2021
21
B
1.3.11 How to remove a broken truck
It’s not allowed to tow the forklift truck
on the ground directly when the truck
is broken down or damaged since the
brake of the truck is closed under normal
circumstances. Appropriate vehicles
should be used to remove the broken
trucks.
•The load weight includes the net weight of
the truck(including battery weight) and the
wooden pallet.
•The pallet or wooden box should be
large and strong enough to withstand the
weightof the truck.
•Pay attention to the fork blades when
lifting the truck onto the pallet, to prevent
injuries caused by the forks.
Follow the prescribed steps and park the
vehicle correctly.
Make sure the forks are aligned with the
pallet, move slowly and stop after inserting
the forks as far into the
pallet as possible.
Operate on open, level ground and pay
attention to ground conditions when lifting
and lowering the pallet to prevent the truck
from tipping.
When transporting the truck, make sure
it is fully secured and take precautionary
measures against bad weather.
Only use haulage equipment with sufcient
load capacity.
CAUTION
i
NOTE
Fig1154-00018OM