REV. 10/2021
20B
1.3.10 Truck transport
1
Correctly x the truck to avoid move when using
truck or trailer.
Procedure:
• Park the truck securely.
• Sling the tensioning belt (1) around the truck
and attach it to the fastening rings of the
transporting vehicle.
• Use wedges to prevent the truck from moving.
• Tighten the tensioning belt (1) with the
tensioner.
WARNING
• The truck or trailer must have fastening
rings.
• Use wedges to prevent the truck.
• Only use tension belt or fastening belt of
good nominal strength.
The pallet truck is designed for short-distance material handling only and is inappropriate for
long-distance transportation. If needed, the truck must be transported by using lifting device or
platform to place it on truck or trailer. Before operation, x the pallet truck rmly on the transport
vehicle with belt, and block the wheel to avoid relative motion during transportation.
Fig1154-00014OM
Fig1154-00022OM
To Next Page
Loading...
