ep RPL201 - Running, Steering, and Braking; Running Modes and Controls

REV. 09/2022
11
B
1.3.4 Running, steering and braking
Running area
Push the side
arms in state
Push the side
arms out state
1.Running
Running area
Rotary button
Control the running direction and
speed of the truck using the drive
switch (1). (the large the rotary angle,
the faster corresponding speed)
When using the truck on a ramp or a
uneven road, please lift the forks of the
forklift to prevent its bottom from colliding
with the road surface.
i
NOTE
1
We distinguish between two travel
modes
Pedestrian mode:
Push the side arms
in, fold up the operator platform. Operate
the drive switch. The truck can travel at
the low speed.
CAUTION
In pedestrian mode make sure you have
sucient distance from the truck.
Stand-on operating mode:
Push the
side arms out, fold down the operator
platform. The truck can be operated at
maximum travel speed.
WARNING
Push the side arms in state
, fold down
the operator platform, the truck can
operat at low travel speed, but we don't
recommend it.