Epever SolarV AN Series User Manual

Copyright
©
2021 SolarV GmbH All rights reserved
www.solarv.de
17
Item
Lead-acid battery
Lithium battery
1
Sealed(default)
LiFePO4(4s/12V; 8s/24V)
2
Gel
Li(NiCoMn)O
2
(3s/12V; 6s/24V)
3
Flooded
User(9
～
34V)
4
User(9
～
17V/12V; 18
～
34V/24V)
CAUTION: When the default battery type is selected, the battery voltage control parameters
will be set by default and can’t be changed. To change these parameters, select "User"
battery type.
Operation:
Step1: Press the “ENTER” button and hold 5s under the battery voltage interface.
Step2: Press the “SELECT” button when the battery type interface is flashing.
Step3: Press the “ENTER” button to confirm the battery type.
CAUTION：Please refer to chapter③ for the battery control voltage, when the battery type
is User.
②Battery Voltage Control Parameters
Below parameters are in 12V system at 25 ºC, please double the values in 24V system
Battery type
Voltage
Sealed
Gel
Flooded
User
Over Voltage Disconnect Voltage
16.0V
16.0V
16.0V
9
～
17V
Charging Limit Voltage
15.0V
15.0V
15.0V
9
～
17V
Over Voltage Reconnect Voltage
15.0V
15.0V
15.0V
9
～
17V
Equalize Charging Voltage
14.6V
——
14.8V
9～17V
Boost Charging Voltage
14.4V
14.2V
14.6V
9～17V
Float Charging Voltage
13.8V
13.8V
13.8V
9
～
17V
Boost Reconnect Charging Voltage
13.2V
13.2V
13.2V
9
～
17V
Low Voltage Reconnect Voltage
12.6V
12.6V
12.6V
9
～
17V
Under Voltage Warning
Reconnect Voltage
12.2V
12.2V
12.2V
9
～
17V
Under Voltage Warning
Voltage
12.0V
12.0V
12.0V
9
～
17V
Low Voltage Disconnect
Voltage
11.1V
11.1V
11.1V
9
～
17V
Discharging Limit Voltage
10.6V
10.6V
10.6V
9～17V
Equalize Duration
120 min
——
120 min
0～180 min
Boost Duration
120 min
120 min
120 min
10
～
180 min

Epever SolarV AN Series Specifications

General

Brand	Epever
Model	SolarV AN Series
Category	Controller
Language	English