Epever SolarV AN Series - Controller Characteristics; Controller Model Naming Rules

Copyright
©
2021 SolarV GmbH All rights reserved
www.solarv.de
2
1.2 Characteristics
Figure 1 Product Characteristics
❶
SELECT button
❻
RS485 communication port
❷
★
RTS port
❼
Mounting Hole Φ5mm
❸
PV Terminals
❽
ENTER button
❹
Battery Terminals
❾
LCD
❺
Load Terminals
★
If the temperature sensor is short-circuited or damaged, the controller will charge or discharge at the
default temperature setting of 25 ºC.
1.3 Naming Rules of Controller models
EXAMPLE:
Tracer 1 2 10 AN
Common Negative System Max.PV
opencircuitvoltage100V System
Voltage12/24VDC Charge &
discharge current10A Product
Series