2
2. Important Safety Instructions
As an AC power supply equipment, the inverter‟s output voltage is
with the same level as that of household power plug. Mind the AC output
terminals, or you may get an electric shock!
Attentions:
Connect the DC input according to the requirement strictly. The
power inverter has a relatively wide input range, but too high or too
low input may cause problems even destroy the inverter. The surge
input voltage can‟t exceed 18V for the 12V inverters, 36V for 24V
inverters, 72V for 48V inverters, or the inverters will be damaged.
Do not expose the inverter to humid, flammable, explosive or dust
environment.
Keep the inverter out of children touch.
Inverter input is recommended to connect to battery, the min.
capacity of battery(expressed in AH) should be calculated in the
following way: 5times of the rated power of the inverter/battery
voltage. If for testing purpose, user should select DC power supply
current at least twice greater than that of the inverter rated input to
keep inverter normal operation. Use DC power supply for testing
may cause the damage of the inverter.
When the inverter works continuously, its surface may became very
hot, please make sure the air ventilation clearance around the inverter
is more than 10cm. Keep away from the material or device which
may suffer from high temperature when the inverter is working. Do
not install the inverter in airproof location and keep enough space
around the inverter.
The wire connects between battery and inverter should be shorter
To Next Page
Loading...
