Epilog Laser FusionPro 16000 - Page 194

Examples of stamp layouts using Fence Method:
Example 1: Single stamp (will not be cut out):
Fence Line
0.001” (.025mm)
Example 2: Single circular stamp to be cut out:
Fence Line
0.001” (.025mm)
Cut Line
0.001” (.025mm)
Example 3: Multiple stamps to be cut:
One fence to
surround all
stamps.
Cut Line
0.001” (.025mm)
Cut Line 0.001” (.025mm)
Example 4: The file contains multiple fence lines that will be cut out.
- 188 -
SECTION 12: ENGRAVING MATERIALS