Epilog Laser FusionPro 16000 User Manual

File Setup FAQs
I have a file with only cut lines, but they came in as an “Engrave” process.
How do I change it to a cut process?
Select the process and change the Process Type to “Vector”.
I merged two of my layers, but now it lost pa of the graphic.
Change the Process Type to “Engrave” and see if they show up now. It may have changed your process
to Vector and hidden any non-vector parts of your image.
I want to set up the Dashboard to automatically process all files I print to
the laser with hairlines as cut lines. How do I do this?
Go to the Settings icon and in the Dashboard tab, change your New Job Settings to “Split by Hairlines”.
I forgot to remove pa of the awork I don’t want to engrave. How do I get
rid of that pa of the file?
There are two ways to do this. Either ungroup your image, select the item and delete it, or separate it by
selection and turn that process to O.
The video checkbox disappeared, how do I get it back?
De-select all of your artwork in the Dashboard. The video checkbox should now re-appear on the le side
of the Dashboard screen, allowing you to turn live view on and o.
Troubleshooting the Laser Dashboard
Matching Printer to Document Sizes
If you are unable to check the box “Printer can match document sizes” when setting up CorelDraw for
printing to the Fusion Pro, you may see the following error:
- 88 -
SECTION 5: THE LASER DASHBOARD

Epilog Laser FusionPro 16000 Specifications

General

Brand	Epilog Laser
Model	FusionPro 16000
Category	Engraver
Language	English