Epilog Laser FusionPro 16000 User Manual

Importing Job Settings
1. To import previously saved settings to a new job, click the Import Job Settings button at the bottom
of the screen.
2. A box will appear asking you to select the settings you want to load into this job. Select your
settings and click “Import”.
3. The job settings should load into the file, ready for printing to the laser.
Note: You may also create Job and Material settings from scratch in their respective Job
Manager tabs.
- 48 -
SECTION 4: THE JOB MANAGER

Epilog Laser FusionPro 16000 Specifications

General

Brand	Epilog Laser
Model	FusionPro 16000
Category	Engraver
Language	English