Safety and operating instructions
© Anbaufräsen PC GmbH | 3390 5221 01 | 2020-09-07
Original Instructions
23
4 Transport
WARNING Hoist tipping over / hydraulic attach-
ment falling
The hydraulic attachment is heavy. The hoist/lifting
equipment and/or hydraulic attachment tipping over or
falling may cause serious injury and material damage.
u Only transport the hydraulic attachment with lifting
equipment with the right load-bearing capacity for the
weight of the hydraulic attachment.
u Only lift and secure the hydraulic attachment with lift-
ing gear (ropes, chains, shackles etc.) with the right
load-bearing capacity for the weight to be lifted.
u Make sure that there is nobody near or under the
suspended hydraulic attachment.
4.1 Transport using a crane
The drum cutter is equipped with transport lugs, for lifting
by crane.
n
Secure the hydraulic attachment with ropes or chains
as shown in the following illustration.
n
Slowly lift the hydraulic attachment.
Ensure that the drum cutter hangs straight, if applica-
ble observe any eccentric centre of gravity.
n
Place the drum cutter on the assembly stand.
To Next Page
Loading...