14
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is
working properly and to allow it time to fall to the correct temperature. Your unit should not
be overlled.
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
water using a sponge or cloth. Wipe completely dry before replacing the shelves and salad
bin. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
In some cases, the door seal may be crushed after prolonged storing pressure,
resulting to the door seal not able to close properly when reversed.
Follow the steps below to solve the issue:
1. Peel o the door seal from the upper or lower corner
and warm it with a hairdryer; the warmth can allow
the door seal to return to its original form. Do not
blow directly on the unit as the warmth may damage
other parts of the unit.
2. Rotate the door seal upside down so that the side
originally with the hinge stay with the hinge.
3. Insert the door seal back into the door from the
upper or lower corner.
4. If the issue still occurs, contact your local service centre for assistance.
180°
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
unit.
• Before Turning On!
Do not turn on until two hours after moving the unit. The coolant uid needs time
to settle. You may damage the cooling circuit if the unit is turned on too soon.
EBF185DI_W23D_IB_5L_Final230817.indb 14EBF185DI_W23D_IB_5L_Final230817.indb 14 17/8/2023 3:32 PM17/8/2023 3:32 PM
To Next Page
Loading...