Eppendorf 5430 - Page 64

Ordering Information
Centrifuge 5430/5430 R
English (EN)
64
Rotor FA-45-24-11 Kit
Rotor FA-45-16-17
Rotor S-24-11-AT
Order no.
(International)
Order no.
(North America)
Description
Fixed-angle rotor FA-45-24-11-Kit
5427 752.005 5427752005 aerosol-tight, angle 45°, 24 places, max. tube diameter 11 mm,
incl. rotor lid (aluminum)
Rotor lid for FA-45-24-11-Kit
5427 760.008 5427760008 aerosol-tight, aluminum
Seal for rotor lid
FA-45-24-11-Kit (5427 R/5430/5430 R), FA-45-48-11,
FA-45-20-17 (5804/5804 R/5810/5810 R)
5820 767.006 5820767006 Set of 5 pieces
Order no.
(International)
Order no.
(North America)
Description
Fixed-angle rotor FA-45-16-17
5427 750.002 5427750002 aerosol-tight, angle 45°, 16 places, max. tube diameter 17 mm,
incl. rotor lid (aluminum)
Rotor lid for FA-45-16-17
5427 751.009 5427751009 aerosol-tight, aluminum
Seal for rotor lid
FA-45-24-11 (5427 R), FA-45-16-17 (5430/5430 R)
5409 717.006 5409717006 Set of 5 pieces
Order no.
(International)
Order no.
(North America)
Description
Swing-bucket rotor S-24-11-AT
5427 757.007 5427757007 aerosol-tight, steel, angle 90°, 24 places, max. tube diameter
11 mm, incl. rotor lid (aluminum)
Rotor lid for S-24-11-AT
5427 758.003 5427758003 aerosol-tight, aluminum
Seal for rotor lid
S-24-11-AT (5427 R/5430/5430 R)
5409 719.009 5409719009 set of 5 pieces
Tube holder for S-24-11-AT
for 4 × 1,5 mL/2,0 mL Eppendorf tubes
5409 721.003 5409721003 set of 2 pieces