EPS Bio Technology EasyMax V - Maintenance and Troubleshooting; Battery Replacement and Maintenance

38
Chapter 5: Maintenance and Troubleshooting
Inserting Batteries
The meter uses two alkaline 1.5V (AAA) batteries. Other types of 1.5V (AAA)
batteries are also acceptable, but the capacity of test times may differ. Install the
batteries when you first use the meter or replace with new batteries when the "LP"
(low power) message and the low battery symbol appear on the display.
The meter will not turn on the first time batteries are installed.
Please press and hold “” (Right Button) or insert the test strip to turn your meter
on.
The meter will turn off automatically. Or you can press and hold “” (Right Button)
to turn your meter off.
Low battery symbol
Note:
1. The meter will not delete earlier records after you replace batteries.
2. You should reset the time and date again after you replace the batteries.
3. 1.5V (AAA) x 2 batteries are available at most stores. You may take the old batteries with you for
replacement.
4. Remove batteries when you will not be using the meter for one month or more.