Page 19
Press button to moves inverse cursor among 8 menus.
Press to enter corresponding interface.
Monitoring interface
There are 7 interfaces for monitoring, as shown in the picture.
Click button to change interface in turn.
Click button to return main menu in any monitoring interface.
Figure 4.4.2 Monitor interface
Notes:
1. ‘Batt Temp’ will display ‘25.0℃’ when there’s no remote temperature
sensor.
2. There’s no temperature compensation when ‘Coefficient =
0.0mV/℃/2V’
3. State :
No-charge, Equalize, Boost, Float
To Next Page
Loading...
