Epson 1390 - Set to “Image Size”

Flatbed Inkjet Printer
１０
１０
3．Set to “Image Size”
We can set the really printing image size outputting for width & height by documents size in menu,
the max differentiate about the image could be set to 300dpi/inche, and the least could be set at
200dpi/inche，when you have this setting, the quality of the image for printing outputting should be
better。
4．To set the really image size of the printing output.
Please select the third option of menu “Image” > “Rotary Image” > “Flip Horizontal Canvas”。
5．The following is the image effect(flip horizontal canvas) as below, for better printing effecting,
please select the printing model for model “inkjet back shot film”, this way would have outputting for
the image inverted effect。