Flatbed Inkjet Printer
４
４
4．Lifting Range — The space of movement about the flatbed。
5．Maintain Cover — the door for maintaining the quality of the printer。
6．The slot of installing for Column device。
7．Control Panel — the panel for operating the printer。
8．Scrap ink collector — for collecting the scrap ink。
9．Power Switch—To Control the power。
10．USB & parallel port for data communicating with computer.
11．Ink Bottle House — for continuous ink supplies。
12．Power jack—220Vpower supplies jack。
13．Holding shelf for ploy veil — for holding the veil。
14．The Fixing bolt of ink tank — for fixing the ink tank。
C．Install the printer
1．Place the printer to a good working flat roof，keep enough space for airiness。
2．Keep enough space front & rear for the movement of the flatbed.
To Next Page
