Epson 1390 - Addenda; Technical Specifications Index

Flatbed Inkjet Printer
２８
２８
C．Other Function
One．Set language on the displayer of the printer
When the printer did not enter Online Status, press the Button of “Setting” to enter language
selection, select the key at the left & right about ”Setting” to select, when them be done, repress
setting to ensure & get back。
Two．Batch Printing
1． When you have batch printing to one picture, you need to exchange the media, move the flatbed,
in this situation you can have batch printing。
For a sample:
If you would like to have printing outputting for the same image with 60pcs media outputting,
you are required to
set the printing quantity at 60pcs, and the distant time at 10seconds, during the distant time, the
flatbed will automatic move to initialized position & start to print。
Setting Method:
Press the key “Setting” in status of online, enter menu, operate the two key zygomorphic
“Setting”, to set time& page Q’ty, set the time & press ensure to quit menu, the printing flatbed
will move back to initialized position.
Have setting to the repeat Q’ty of the operation, exchange the media within the distant time.
三．Juxtapose Printing
When the image with size bigger than the media, if you can not have the printing outputting for
once, you should have the image to be print for twice, in this situation, you should care for the
problem of juxtaposing the media, before every printing to the image, please restart this printer for
better orientation。
Chapter Five: addenda
A． technical Index:
Printing Technology INKJET PIEZO
Printing Size A3+ B 329mm X 483mm
Equipment Size
750 X 550 X 560（L X W X H）
Equipment Weight 75Kg
Printing Speed 9PPM(A4COLOR Font)
Printing Thickness The max @ 170mm for flat object, cylinder with diameter
@140mm
Printing Weight The Max @ 20Kg
Transferring port
IEEE-1284 Parallel／USB Serial Port
Printing Precision 2880 dpi /1440 dpi /720 dpi/360 dpi
Ink 6Color solvent ink
Ink Supply Continuous ink supply
Power Supply
AC220V／55W
Operating System WIN2000/NT/XP/MAC(USB)
Work Condition
Temperature 10~35，Humidity20~80％