Epson 1390 - Photoshop Image Editing Workflow

Flatbed Inkjet Printer
２１
２１
1, Start the image processing software adobe Photoshop。
2,Open the image be selected。
Some of the image with small size，we have to adjust the size by the tool of the processing
software for increasing the value of size & differentiate rate, finished, the software will automatic
create a new image with better quality after processing。
4、Check the size of the printing object, put it on the appropriate position of the flatbed.
（For Example: To top at 0 + To Left at 0）。
5、Now have a sample for references, to build a new file with correct size, we take a sample with box
as above, the size at 10 x 10cm, but have to cover image on the printing area, when we build a
new file, please set the size of the file to bigger size, we call this action to bleed。
6、Build the new file，move the image to the new file。