Flatbed Inkjet Printer
２６
２６
（2）When the setting has been done, click “printing” button to enter print, and please confirm the
name of the printer is 1290,if the quantity over 1 pc, please refer to the mentioned information
on other chapter。
（3）Pleas click “property” to enter dialogism, select “custom” at “model”, click “advanced” to enter
setting dialogism。
（4）at the advanced dialogism please set media type first, we recommend use the inkjet backshot
film, photo quality inkjet printing media, photo quality polish film。Remove the option of “high
speed” “plane reversal”, select the object of “edge flatness”。At the color manager, there have
a value setting about “increase” please keep default at 1.8, if there have media special, image
grey, color broken etc, you can also have the value increase to optimize this image。
（5）The quality setting。
The quality setting is come true by different resolving of the printer, you can make it with grade
by option 360dpi,720dpi,1440dpi& 2880dpi, we are suggest you make it 1440dpi & 2880dpi, if
the object with bigger printing area, for better speed printing, we suggest you use 720dpi。
12、Printing finished.
After the steps has been done mentioned above, click ensure button to start printing。
Enclose：The supplement of printing skill and note point.
When you have different setting to the media, there will has different distance to the top , “the
printing media” is with the same distance to the guage of the printer, the media about “film” will has
distance to top for one cm be moved。
To Next Page
Loading...
