32
Testing and Connecting the Printer
Printing a status sheet
1. Turn on the printer. After about 30 seconds, the display shows
Ready.
Note:
The time may vary depending on the amount of memory installed.
2. Press the Enter button three times. The printer starts
printing a status sheet.
3. Check that information on the options installed in the printer
is correct. If the printer properly recognizes an installed
option, the option’s name appears under Hardware
Configurations. If not, try reinstalling the option.
If the printer cannot print a status sheet, or if you are unable to
get the printer to print a correct status sheet, contact your dealer.
Enter button
To Next Page
Loading...
Need help?
General