30
Testing and Connecting the Printer
5
Testing and Connecting the
Printer
Plugging in the Printer
1. Make sure that you have the correct power cord for your
power source.
c
Caution:
It is not possible to change the printer’s voltage. If the
required voltage and your outlet voltage do not match,
contact your dealer for assistance. Do not plug in the power
cord.
2. Attach the power cord as shown below.
c
Caution:
Avoid using an electrical outlet that is controlled by wall
switches or automatic timers. Accidental disruption of power
can erase valuable information in your computer’s and
printer’s memories.
AC inlet
The required
voltage is
indicated here
OFF
To Next Page
Loading...
Need help?
General