What to do if my Epson AcuLaser C4000 is not printing in color?
If your Epson printer is not printing in color, verify that: * The Color setting is selected: Ensure that 'Color' is selected, not 'Black,' in the printer driver settings. * Application settings are correct: Confirm that the color settings in your application are appropriate for color printing.
Why is my Epson printer outputting complete blank pages?
If your Epson printer is outputting complete blank pages, consider the following: * Paper feed issue: Remove the paper stack, fan it, tap it on a flat surface to even the edges, and then reload the paper. The printer may have loaded more than one sheet at a time. * Low toner: If the message appears on the LCD window, it indicates that the amount of toner is low. * Photoconductor unit problem: Replace the photoconductor unit.
What to do if my Epson printer is printing garbled characters or asterisks?
If your Epson printer is printing garbled characters or asterisks, the issue might stem from a few potential causes: * Check the interface cable: Ensure that both ends of the interface cable are securely plugged in. * Verify the cable type: If you are using a parallel interface, confirm that the cable is a double-shielded, twisted-pair interface cable no more than six feet in length. * Correct the emulation setting: Specify the correct emulation mode using the printer’s control panel menus.
How to fix dark or dirty background on Epson printer printouts?
A dark or dirty background on Epson printouts can be due to: * A problem with the photoconductor unit: Replace the photoconductor unit. * Incorrect paper type: Use EPSON special paper, or smooth, high-quality copier paper for best results. Avoid paper with a rough surface.
How to troubleshoot misalignment of colors on my Epson AcuLaser C4000?
If you notice a misalignment of colors on your Epson printer, it may be because the registration position of each color has shifted. Check the color registration and adjust the alignment if necessary. See 'Checking color registration' for instructions.
Why won't the font I selected in the application software print on my Epson AcuLaser C4000?
If the font selected in your application software won’t print on your Epson printer, it might be due to: * TrueType fonts substitution: In Windows, click the 'Print TrueType fonts as bitmap' button in the Extended Settings dialog box. * Unsupported font: Make sure that you have installed the correct font. See 'Available Fonts' for more information.
How do I fix the position of the printout if it's incorrect on my Epson AcuLaser C4000 Printer?
If the position of the printout is incorrect on your Epson printer, ensure that you are using the correct page length and margin settings in your application.
How to resolve graphics printing incorrectly on Epson printer?
If graphics don’t print correctly on your Epson printer, verify that: * The printer emulation setting is correct: Make sure that your application is set for the printer emulation you are using. * There is enough memory: Install more memory to avoid this problem.
What causes black or white bands to appear in Epson printer printouts?
Black or white bands appearing in Epson printer printouts may indicate a problem with the photoconductor unit. Replace the photoconductor unit.
How to fix light or faint printed images from my Epson AcuLaser C4000 Printer?
If the printed image from your Epson printer is light or faint: * Check paper condition: Do not store your paper in a humid or damp environment. * Disable Toner Save mode: Turn off the Toner Save mode using the printer driver or the printer’s control panel menus. * Photoconductor unit: There may be a problem with the photoconductor unit. Replace the photoconductor unit.
To Next Page
General