Epson AcuLaser C4000 Setup Guide

6
Safety Instructions
❏ Use of multiple laser printers in a confined area
❏ Operation in conditions of extremely low humidity
❏ Poor room ventilation
❏ Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat
generated are:
❏ Not blown directly into the user’s face
❏ Vented directly out of the building whenever possible
For United Kingdom Users
The EPSON AcuLaser C4000 is a page printer which utilizes a
semiconductor laser.
There is no possibility of danger from the laser, provided that the
printer is operated according to the instructions in the guides
provided.
Since radiation emitted by the laser is completely confined within
protective housings and external covers, the laser beam cannot
escape from the machine during any phase of user operation.
w
Warning:
The use of controls, or the performance of procedures and
adjustments other than those specified in this guide may result in
hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser
diode is 10 mW and the wavelength is 775 to 799 nm.

Epson AcuLaser C4000 Specifications

General

Brand	Epson
Model	AcuLaser C4000
Category	Printer
Language	English