Epson AcuLaser MX20DN series - Sending Scanned Data by E-Mail

Sending scanned data by e-mail
1. Press the Scan button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
how to set your original, see “Setting Your Originals” on page 47.
3. Press the F3 button on the control panel.
4. Press the l or r button several times to select the Basic Setting tab and press the F1 button.
5. Press the F1 or F2 buttons to select the items and enter a destination e-mail address and subject.
Note:
A maximum of 64 characters can be entered for the destination e-mail address.
6. Press the OK button.
Note:
If necessary, specify the desired settings, such as Basic Settings, File Setting, Scan
Setting, and Function.
7. Press the Start button.
The printer starts scanning.
Note:
If a failure occurs while transmitting e-mail, an error report is printed automatically.
Epson AcuLaser MX21/MX20 Series User's Guide
Scanning 110