Scanning in Office Mode
If you want to scan your documents by placing them on the document table, see “Scanning in Office
Mode Using the Document Table” on page 70 for instructions.
If you want to scan your documents by loading them in the Auto Document Feeder, see “Scanning in
Office Mode using the Auto Document Feeder” on page 71 for instructions.
Scanning in Office Mode Using the Document Table
1. Place the original(s) on the document table. See “Setting Your Originals” on page 47 for
instructions.
2. Start Epson Scan. See “Starting Epson Scan” on page 68 for instructions.
3. Select Office Mode in the Mode list. See “Changing the scan mode” on page 69 for instructions.
4. Select Color, Grayscale, or Black&White as the Image Type setting.
Epson AcuLaser MX21/MX20 Series User's Guide
Scanning 70
To Next Page
Loading...
