Epson AcuLaser MX20DN series - Displaying Memory; Registering Recipients; Using the Address Settings Menu on the Control Panel

Displaying memory
This function is used to check the printer’s memory utilization.
1. Press the Fax button.
2. Press the l or r button several times to select the Function tab and press the F2 button.
The memory utilization information is displayed.
Registering Recipients
When sending faxes using the speed-dial or quick-dial function, you need to register the recipient
information in advance. You can register recipients from the Address Settings menu on the
control panel.
c
Caution:
While the Fax Memory LED is lit, do not change a recipient setting.
Using the Address Settings menu on the control panel
Registering for speed-dial
You can register up to 200 recipients in the speed-dial list.
1. Press the Setting button on the control panel.
2. Press the u or d button several times to select Address Settings, and then press the OK button.
3. Press the u or d button several times to select Fax No., and then press the OK button.
Epson AcuLaser MX21/MX20 Series User's Guide
Faxing (DNF Model Only) 134