Scanning in Home Mode
Note:
In Home Mode, you can only scan from the document table. If you want to scan using the Auto
Document Feeder, change to Office Mode or Professional Mode. See “Changing the scan mode” on page
69 for details.
1. Place your original(s) on the document table. See “Setting Your Originals” on page 47 for
instructions.
2. Start Epson Scan. See “Starting Epson Scan” on page 68 for instructions.
3. Select Home Mode in the Mode list. See “Changing the scan mode” on page 69 for instructions.
4. Click the arrow to open the Document Type list, and select the type of your original(s) you are
scanning.
5. Select Color, Grayscale, or Black&White as the Image Type setting.
Epson AcuLaser MX21/MX20 Series User's Guide
Scanning 73
To Next Page
Loading...
