Epson AcuLaser MX20DN series - Fax no; Admin Settings; Password Config Menu

Item Settings
Authentication Password up to 20 characters
Fax No.
Lets you register, edit, or delete speed-dial and quick-dial numbers.
Note:
This is available for DNF model only.
Item Settings
Speed Dial Settings Number: up to 50characters
Name: up to 16characters
Index: up to 8characters
Quick Dial Settings -
Clear All Address -
Admin Settings
You may be prompted to enter a password to open this menu. However, the default setting requires no
password, so you can enter the menu by pressing the OK button.
Item Settings
Password Config Menu Change Password: up to 20 characters
Limit Range: Disable, Interface, All
Default Mode
Copy, Scan, Print, Fax
*
SelecType Init -
*
Available for DNF model only.
Password Config Menu
Specifies an administrator password. When Interface is selected in Limit Range, you need to
enter the password to change interface settings.
Epson AcuLaser MX21/MX20 Series User's Guide
Using the Control Panel 171