Note:
To change a recipient assigned for the quick-dial, select the number that you want to change a
recipient, and then press the F3 button.
6. Select a recipient you want to assign for quick-dial using the u and d buttons, and then press the
OK button.
Note:
Press the F4 button to confirm the detailed information about the registered speed-dial.
The selected recipient is assigned for the quick-dial.
Deleting all recipients
This function is used to collectively delete all the recipients registered to the speed-dial list or assigned
to quick-dial.
1. Press the Setting button on the control panel.
2. Press the u or d button several times to select Address Settings, and then press the OK button.
3. Press the u or d button several times to select Fax No., and then press the OK button.
4. Press the u or d button several times to select Clear All Address, and then press the OK
button.
5. Press the F3 button to select Yes.
All the recipients registered to the speed-dial list or assigned to quick-dial are deleted.
Epson AcuLaser MX21/MX20 Series User's Guide
Faxing (DNF Model Only) 136
To Next Page
Loading...
