2. Place an original on the document table, with the side to be scanned facing down.
Note:
❏ The area with a width of maximum 2.0 mm from the horizontal edge and 2.0 mm from the
vertical edge is not scanned.
1. Maximum unreadable area of 2.0 mm
2. Maximum unreadable area of 2.0 mm
2
1
❏ Always keep the document table clean.
3. Close the document cover gently so that the original does not move.
Note:
❏ Do not leave photographs on the document table for an extended period of time as they may stick
to the glass.
❏ Make sure the document is flat against the glass surface, otherwise the image will appear fuzzy
and out of focus. Also be sure to close the document cover to prevent interference from external
light.
Epson AcuLaser MX21/MX20 Series User's Guide
Paper Handling 49
To Next Page
Loading...
