24
Preparation
3
If using Batch Mode, or when Stacker 3 is set as the output stacker in External Output
Mode, grasp the handle of Stacker 3, and insert by aligning with the recesses.
4
Close the disc cover.
• When using Stacker 3, set the lock lever to the [LOCK] position, and do not pull out Stacker
4.
• Stacker 3 is not used in Standard Mode and when Stacker 4 is set as the output stacker in
External Output Mode. Set the lock lever to the [UNLOCK] position.
To Next Page
Loading...
