47
Administration and Management
Canceling jobs
Use the following procedure to cancel processing of a job.
1
Start EPSON Total Disc Monitor.
See “Starting EPSON Total Disc Monitor” in the PP-100N User’s Guide for the start procedure.
2
Select the job you want to cancel, and click [Cancel].
3
Click [Yes].
When the job is canceled, the job disappears from the [Unfinished Job] screen.
Only a job for which the status Waiting, Publishing, Paused, Pausing, Standby, or Recovering
can be canceled.
If a disc is being published, that processing is stopped, and the disc is output to the output
stacker.
To Next Page
Loading...
