Epson CO-W01 - Connecting to a USB Device

30
2. Connect the cable to your projector's USB-B port.
3. Connect the other end to any available USB port on your computer.
4. Do one of the following:
• Windows 11/Windows 10/Windows 8.x: Click EPSON_PJ_UD when it appears on the desktop,
then select Run EMP_UDSE.EXE in the dialog box that appears to install the Epson USB Display
software.
• Windows 7/Windows Vista: Select Run EMP_UDSE.EXE in the dialog box that appears to
install the Epson USB Display software.
• Mac: The USB Display setup folder appears on your screen. Select USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software.
Follow any on-screen instructions. You need to install this software only the first time you connect
the projector to the computer.
The projector displays the image from your computer's desktop and outputs sound, if your presentation
contains audio.
Parent topic: Projector Connections
Related tasks
Changing the Projection Mode Using the Menus
Installing the Safety Wire
Connecting to a USB Device
You can connect a USB device or cable to the projector's USB-A port to project images from the device.
Use the USB cable supplied with the device.