40
6. Select Passphrase and enter a passphrase from 8 to 63 characters long. To enter more than 32
characters, use Web Config to enter the passphrase.
7. Select Complete and follow the on-screen instructions to save your settings and exit the menus.
Parent topic: Wireless Network Projection
Using a QR Code to Connect a Mobile Device
After you select the wireless network settings for your projector, you can display a QR code on the
screen and use it to connect a mobile device using the Epson iProjection app.
Note: Make sure you have installed the latest version of Epson iProjection on your device. Visit
epson.com/iprojection (U.S.), epson.ca/iprojection (Canada), or latin.epson.com/iprojection (Caribbean)
for more information.
1. Press the home button on the remote control.
2. The Home screen is displayed.
3. Select Connection Guide > Android/iOS > Next.
The QR code is displayed on the screen.
Note: If you do not see the QR code, set the Display LAN Info. setting to Text and QR Code in the
projector's Network menu. To hide the QR code, press the return button.
4. Start Epson iProjection on your mobile device.
5. Use the QR code reader feature to read the QR code and connect your device to the projector. Visit
epson.com/iprojection (U.S.), epson.ca/iprojection (Canada), or latin.epson.com/iprojection
(Caribbean) for instructions.
To correctly read the QR code, make sure you face the screen squarely and are close enough so that
the projected code fits into the guide of the mobile device's QR code reader. If you are too far from the
screen, the code may not be read.
Parent topic: Wireless Network Projection
Related references
Projector Network Settings - Network Menu
To Next Page
Loading...
